Dirt Bike Trailer
#UDBT-2 or #K-UDBT-2 (kit)
Dirt bike trailer uses 2-6' trailer channels and 1-6' trailer ramp. Channels constructed from 1/2" plywood encapsulated on each side by 1/4" fiberglass unit also includes 6 eye bolts for tying down with ratchet straps (straps not included). Unit shipped knocked down. 500cc limit on cycle size.

Specifications: 43" between fenders, length adjustable, 980 lb. carrying capacity, 480 x 8B or 480 x 12B rims and tires.

Motorcycle Trailer
#UMCT-1 or #K-UMCT-1 (kit)
Motorcycle Trailer uses the basic frame along with 1-8' trailer channel and 1-8' ramp channel. Channels constructed from 1/2" plywood encapsulated on each side with 1/4" fiberglass. Unit also includes 6 eye bolts for tying down with ratchet straps (straps not included). Unit shipped knocked down.

Specifications: 43" between fenders, length adjustable, 980 lb. carrying capacity, 480 x 8B or 480 x 12B rims and tires.

BACK TO TOP

#MBT1 PICTURED

Cargo Trailer
#MBT1
Cargo trailer has a sporty aerodynamic compartment measuring 34" wide x 38" long x 20" deep. Fiberglass construction. Lift off lockable top cover, 16.5 x 65 x 8 wheels with sporty turbine wheel covers. Ships Via UPS Specifications: 36" wide overall. 250 lb. carrying cap. 16.5 x 6.5 x 8B tires and rims. Overall length 76". This model will not convert with other MPT models.

BACK TO TOP

Low Profile Motorcycle Trailers
#LTB1LP & #UTB1LP with #MCK11 & 2 motorcycle trailers,
low profile tilt bed design. Great for dirt bikes all the way up to large street bikes. Unit features our exclusive motorcycle tie down system that leaves the front suspension intact without compressing the forks and ruining the front fork seals. The tie down system has a v-shaped 1/2 circle wheel cage in which the front wheel is cradled and tied down with 2 -1500 lb. ratchet type tie down straps. The tie down system mounts to the trailer bed using 6 heavy duty 1/2" tie down cranks. The tie down system can be purchased separately to mount to an existing trailer. Tie down system includes the wheel cage tie down straps only. (rear tie down straps not supplied with the tie down system) Rear tie downs are not always required when transporting smaller bikes.

BACK TO TOP

#UUT-2 PICTURED

4 ft. Utility Trailer
#UUT-1
Flat Bed Trailer uses the basic trailer frame along with a section of 3/4" plywood [supplied by customer] 43" x 48" fasteners also supplied. Ships via UPS Specifications: 43" between fenders, length adjustable, 980 lb. carrying ca., 480 x 8B or 480 x 12B rims and tires.

4 ft. Utility Trailer
#UUT-2
Same as trailer above but comes complete with the fasteners for the flat bed section, but also includes the hardware kit for side boards and a removable front and rear gate. Wood supplied by customer. Ships via UPS Specifications: 43" between fenders, length adjustable, 980 lb. carrying ca., 480 x 8B or 480 x 12B rims and tires.

8 ft. Utility Trailer

#UUT-3
Same as the #UUT-1 trailer, but an 8 ft. version. Unit uses basic frame with frame extensions. Wood supplied by customer. Dimensions 43" x 96". Ships via UPS Specifications: 43" between fenders, length adjustable, 980 lb. carrying ca., 480 x 8B or 480 x 12B rims and tires.

#UUT-4
Same as the #UUT-2, but an 8 ft. verion. Unit uses frame extensions along with the basic frame and has the hardware kit for side, front and back panels. Ships via UPS Specifications: 43" between fenders, length adjustable, 980 lb. carrying ca., 480 x 8B or 480 x 12B rims and tires.

6 X 8 Tilt Bed Trailer

#LTB1
76"x100" tilt bed utility trailer. 530X12C tires and rims. 1700 lb carrying capacity. 12 ft. overall length, 94 inch overall width. Unit can be shipped to you via UPS. Plywood not included. 2"x3" frame work. Trailer shown with 2 ATV's. Wt. 320 lbs. Ships via UPS Baked on polyester finish. Constructed from 4 sided steel structural tubing. Most other mail order trailers are constructed from a 3 sided U channel. Prewired lighting kit. Composite fenders. Very easy assembly. Only 4 bolts assemble the main framework.

Golf Cart Trailer

#UGC1 52"X100"

tilt bed golf cart trailer. 16x5X6. 5X8 tires and rims. 980 lb. load cap. 12 ft. overall length, 68 inch overall width. Unit has a low profile design that allows for easy loading of your golf cart. Sporty turbine wheel caps and steel side rails are std. on the #UGC1. 2" X 2" frame work. Plywood not included. Wt. 275 lbs. Ships Via UPS Baked on polyester finish. Constructed from 4 sided steel structural tubing. Most other mail order trailers are constructed from a 3 sided U channel. Prewired lighting kit. Composite fenders. Very easy assembly. Only 4 bolts assemble the main framework.

4 X 8 Tilt Bed Trailer (1250 lb cap.)

#UTB2
52"X100" tilt bed utility trailer. 480X12B tires and rims - 1250 lb. carrying capacity. 12 ft. overall length, 68 inch overall width. Shown with lawnmower. Unit can be shipped direct to you via UPS. 2"X2" frame work. Plywood not included. Wt. 240 lbs. Baked on polyester finish. Constructed from 4 sided steel structural tubing. Most other mail order trailers are constructed from a 3 sided U channel. Prewired lighting kit. Composite fenders. Very easy assembly. Only 4 bolts assemble the main framework

4 X 8 Utility Trailer (980 lb cap)

#UTB1
52"X100" tilt bed utility trailer. 480X8B tires and rims - 980 lb. carrying capacity. 12 ft. overall length, 68 inch overall width. Shown with snowmobile. Unit can be shipped direct to you via UPS. 2"X2" frame work. Plywood not included. Wt. 220 lbs. Baked on polyester finish. Constructed from 4 sided steel structural tubing. Most other mail order trailers are constructed from a 3 sided U channel. Prewired lighting kit. Composite fenders. Very easy assembly. Only 4 bolts assemble the main framework.

ATV Trailer

#UATV-1 or #K-UATV-1 (kit)
ATV Trailer Unit comes with the basic frame. Along with 2 trailer channels and 2 ramp channels. All channels are 11" wide and 6 ft. long. Channels are constructed from 1/2" plywood encapsulated on each side with 1/4" fiberglass. Unit will accommodate ATV's 2 or 4 WD up to 43" wide unit shipped knocked down. Ships via UPS Specifications: 43" between fenders, length adjustable, 980 lb. carrying capacity., 480 x 8B or 480 x 12B rims and tires.

Transport Dolly

#UTPD-1
In the shop, the garage or on the beach make your PWC easy to handle with the Transport Dolly. Heavy gauge steel construction. Fat boy tires for easy rolling over sand and manuevering by operator. Adjustable bunks and tongue. 11'5" long. 18.5 x 5B x 8 tires. Optional Ratchet Winch and Strap #RW1 Your choice of Bow Stops Horizontal Pin or Vertical Pin

Bicycle Trailer

#UBT-6 or #K-UBT-6 (kit only)
Bike trailer uses the basic trailer frame along with a rack style holder tray with a soft sponge rubber protector on the clamp areas. The rack is adjustable in height. Unit also has a lock strap that when installed with a padlock secures the bikes from theft. Unit is shipped knocked down. [Padlock not included.] Ships via UPS Specifications: 43" between fenders, length adjustable, 980 lb. carrying capacity., 480 x 8B rims and tires.

#UBT-6R or #K-UBT-6UR (kit only)
Similar to the trailer above, but a less expensive version. This unit uses 6 U-channels in which the bike tires are set and a center crosss which is adjustable both up and down and front to back. The cross is used along with bungee cords to secure your bikes. Unit is shipped knocked down. (bungee cords not included.) Use of a drill is required for assembly.

BACK TO TOP

#UFB1 PICTURED

Fishing Boat Trailer
#UFB1 and #UFB1GL (galvanized)
Constructed from heavy gauge steel tube. Parts include: Composite bolt on fenders Adjustable bunks Adjustable winch stand with winch Keel roller and waterproof light on rear 2" coupler 4.80 x 8 or 480 x 12B rims and tires 1000 lb. cap. 15'6" long. 185 lbs. 43" between fenders. Optional Bearing Protectors #B6 Optional Swivel Stand #B10

PWC Trailer
Optional Winch System #PWC4 #UPWC1 and #UPWC1GL (galvanized) Constructed from heavy gauge steel tube. Parts include: Composite bolt on fenders Adjustable bunks and winch stand Waterproof lights on rear 4.80 x 8 or 480 x 12B rims and tires 1000 lb. cap 11'6" long. 175 lbs. 43" between fenders. 2" coupler. Optional Bearing Protectors #PWC6 Optional Tongue Stand #PWC10

Double PWC Trailer
#UPWC2
Constructed from heavy gauge steel tube. Will arrive knocked down. Parts include: Composite bolt on fenders Adjustable bunks Adjustable winch and strap Waterproof light on rear 2" coupler 530x12C tires 2000 lb. cap 15 ft. long. 300 lbs. 83" between fenders. Does not interchange with other MPT series trailers.

Square Stern Canoe Trailer
#USSCT1
Max Boat length 18 ft. Max capacity 980 lbs. Tire size 480 x 8b. Shown with optional HD 12" tires and side guides.
Optional 6 Place Bike Rack - #KUTB6XL Fits UKCT2 & XLCSG.

One Place Kayak/Canoe Trailer

#UKCT1XL
Max Boat length 18 ft. Max capacity 980 lbs. Tire size 480 x 8b. UKCT1 has Max Boat length of 12'.

Two Place Kayak/Canoe Trailer
#UKCT2XL
Max Boat length 18 ft. Max capacity 980 lbs. Tire size 480 x 8b. UKCT2 has Max Boat length of 12'.

Canoe Trailer
#UCT4
Unit holds 4 canoes up to 17' long x 42" wide. STD 480 x 4B tires (shown in picture with optional 480 x 12B tires). Unit is 80" wide x 17" long. 1200 lb. G.V.W. Includes 8 tie down lugs and plastic protector strips on carrying arm. Adjustable carrying arms.

Kayak Trailer

#UKT4
Unit holds up to 4 Kayaks or small canoes up to 12' long. x 32" wide. Unit is 60" wide x 12' long. 1200 lb. G.V.W. Includes 8 tie down lugs and plastic protector strips on carrying arms. Adjustable carrying arms. Options: Bearing protectors, HD tires - 480 x 12B

BACK TO TOP

#EUT46HD
Same as #EUT46 except unit has 12" tires, wheels and fenders. 4' x 6' utility trailer constructed from heavy guage 2" x 2" square tubing. 62" overall width. 122" overall length. 4 side square tubular tongue, 4 side square tubular frame, 4 side square tubular axle, composite fenders, 4 ply tires. Specifications: Tire Size 480 x 8B. Carry capacity 950 lb. Bed Size 4' x 4'. Wt. 230 lb. 2" coupler.

#EUT44 4' x 4'
utility trailer constructed from heavy gauge 2" x 2" square tubing. 62" overall width. 96" overall length. 4 side square tubular tongue, 4 side square tubular frame, 4 side square tubular axle, composite fenders, 4 ply tires. Specifications: Tire Size 480 x 8B. Carry capacity 950 lb. Bed Size 4' x 4'. Wt. 180 lb. 2" coupler.

#EUT46 4' x 6'
utility trailer constructed from heavy gauge 2" x 2" square tubing. 62" overall width. 122" overall length. 4 side square tubular tongue, 4 side square tubular frame, 4 side square tubular axle, composite fenders, 4 ply tires. Specifications: Tire Size 480 x 8B. Carry capacity 950 lb. Bed Size 4' x 4'. Wt. 230 lb. 2" coupler.

BACK TO TOP

Receiver Hitch Carrying Basket

#RHB1
20" x 60" tray size expanded metal bottom. 11 ga. side rails. 2" x 2' x 3/16" receiver tube. Black baked on polyester finish. 500 lb. capacity. Great for camping gear, coolers, luggage, or anything you need extra room for.

Receiver Hitch Tire Rack
#RHTR1
Receiver hitch mount spare tire rack, constructed from heavy gauge square and rectangular tubing. Unit is equipped with a hinge device that allows the tailgate or rear door to open without having to remove the spare tire. For 2" receivers only.

Receiver Hitch Steps
#RHS1 & RHS3
Receiver hitch steps. 1 and 3 step models. Great for camping, making deliveries or anyone who is off and on the rear of a pickup truck a lot. Heavy duty 1/4" plate steel steps with safety traction surface. 2" receiver hitch only.

Reveiver Hitch Extension Tube
#RHET2
Handy extension allows user to carry long items with ease. Great for millwork, plumbing pipe, canoes, and lumber. Heavy duty 2" x 2" extension tube with 2 built in tie down lugs. 2" receiver tube only.

Receiver Hitch Bike Rack
#RHBR4
Sturdy steel 4 place bike rack unit features 2 clamping trays with turn tight knobs to securely hold your bikes. Unit also features the fold down design to allow user access to rear door or tailgate. Fits 2" receiver hitch. 1 1/4 also available. Ships via UPS Receiver Hitch Tow Hook

Receiver hitch towing hook
#RHTH1
Handy tow hook fits std. 2" receiver hitches. Unit built using a 10,000 lb. hook. Great for emergencies or great gift idea for the truck enthusiast. Locking pin not included.

Receiver Hitch Deck Frame
#RHDF1
Sturdy 2" x 2" square tube receiver hitch deck frame. 20" x 60" maximum platform size. Unit allows user to mount a plywood deck or any other device desired. Fasteners included. For 2" receivers only.

Motorcycle Caddy

#RHMC1
Unit simply slides into a conventional 2" receiver hitch and cranks up and down vertically. The down position is for loading of the bike's front wheel and the up position for road travel. Large 1/2 circle wheel cage cradles bike's front tire. Unit allows 16" of vertical travel. Caddy features 3 ratcheting tie down straps that wedge the front tire into the wheel cage for a positive firm hold of your bike's front wheel. Ships via UPS Easy to store Saves expense of trailer and licencing Great for dirt bikes, street bikes, and touring bikes For hitch height lower than 15" or higher than 18" Will need the aid of an offset adapter tube Specifications: Wt. Cap. 500 lbs. 2" reveiver hitch.

Dirt Bike & Scooter Caddy
#RHDC1
Unit simply slides into a conventional 2" receiver hitch. Unit has a vertical jack built in that allows the user to crank the unit to ground level for loading and tie down and then can be cranked up and lock into the transport position for road travel. Unit makes for an easy one man operation. Unit comes with all hardware and locking pins and 6 foot composite/fiber-glass bike channel. (Everything except the tie down straps) Unit is made from heavy gauge square tubing. Great item to attach to motorhomes, unit will carry dirt bikes up to 500cc or 500 lbs, or mopeds and scooters. Unit is adjustable to work with different height hitches. Great for motor homes and campers Great for dirt bikes, mopeds and scooters Easy to store Save the expense of a trailer Heavy duty 2" x 2" square tube construction For 2" receiver hitches only. For best results use frame mounted receiver hitch. Tie down straps not included.

Receiver Hitch Swivel Crane
#RHSC2
Unit easily picks up V8 engine with transmission. Has a 1500 lb. capacity. Works great with tail gate on or off. Features 2 adjustable stand legs. Unit swivels 360 degrees for easy loading and unloading.